Panasonic WJ-NT314 Network Operating Instructions page 37

Set the depth manually
Step 1
Click the [SET] button of "Depth correction" on the
[AVMD] tab.
→ The "Depth correction" menu will be displayed.
Step 2
Select "Manual setup" for "Setup mode".
Step 3
Draw a marker by dragging the mouse between the
front side and rear side on the screen.
Notes:
• By dragging the mouse up and down, the size of
marker will become larger or smaller. (Horizontal to
vertical ratio is fixed to 1:3.)
• To retry drawing the marker, click [CLEAR] button.
• Assuming that people go forward and backward, it is
possible to calculate the correct depth by drawing
the larger marker for the nearer object (lower area in
the image) and the smaller marker for the farther
object (upper area in the image).
Step 4
After drawing the marker, click the [Execute] button of
"Depth calculation".
→ Calculation result is displayed in 3D on the screen.
Step 5
Click the [SAVE] button after completing the settings.
→ Returns to the "Detection area setup" menu.
Note:
Click the [RETURN] button to return to the
"Detection area setup" menu without setting the
depth.
37