Ppp Type Connection 2 (Network Access) - Panasonic WJ-NT104 Operating Instructions Manual

PPP Type Connection 2 (NETWORK ACCESS)

1. Windows NT Setup
Camera (max. 4)
If the Dial-Up Networking icon is not in My Computer, it is not installed. You can use the following procedure to install it.
(1) Right-click the Network Neighborhood icon on the desktop, and then click Properties in the pull-down menu.
(2) In Network dialog box, click the Services tab.
(3) If the Remote Access Service is not in the Network Services list, click the [Add] button to display the Select Network
Service dialog box.
(4) Choose Remote Access Service, and then click the [OK] button to display the Windows NT Setup dialog box.
(5) Click the [Continue] button in the dialog box to install Remote Access Service.
q When installed, Remote Access Service appears in the
list of Network Services.
In the Network dialog box, choose Remote Access
Service, and then click the [Properties] button to dis-
play the Remote Access Setup window.
w Click the [Configure] button and configure the port in
the Configure Port Usage dialog box. Then click [OK]
to return to the Remote Access Setup window of Step
q.
e Click the [Network...] button and set the protocols
used in the Network Configuration dialog box as fol-
lows:
r Check TCP/IP in the Dial out Protocols field.
t Check TCP/IP in the Allow remote clients running
field.
y Check Allow any authentication including clear test
in the Encryption settings field.
22
RS-232C
cable
Modem/TA
CSU/DSU
WJ-NT104
RS-232C
cable
Modem/TA
Dial-up server/
CSU/DSU router etc.
Public lines
LAN
PC
(Windows95 etc.)