Panasonic WJ-NT104 Operating Instructions Manual page 80

cgi-bin/almctrl
The substitute characters ordinarily used for HTML file get are not applicable. This substitute character is used in the
same way as those for HTML file get.
Item
Log number
First frame number
Frame number
immediately after
alarm
Last frame
Specified frame
Next frame number
Preceding frame
number
Alarm image
display size
For example, the first alarm number of the specified log is described in the HTML by /alm%|_%h.jpg.
80
Substitute character
%l Log number 0000-FFFF (hexadecimal, 6-bit)
%h First frame number of an alarm image for specified log number (LNO). Normally, 00.
%a Frame number immediately after receiving an alarm for specified log number (LNO). 00 -
FF (hexadecimal, 2-bit)
%t Last frame number of an alarm image for specified log number (LNO). 00 - FF (hexadeci-
mal, 2-bit)
%c Same as the value of argument FNO. 00 - FF (hexadecimal, 2-bit)
%n Value of preceding argument FNO. If FNO represents the first frame number (= %h) of
the specified log number (LNO), the value of FNO is applied. 00 - FF (hexadecimal, 2-
bit)
%p Value of preceding argument FNO. If FNO represents the last frame number (= %t) of
the specified log number (LNO), the value of FNO is applied. 00 - FF (hexadecimal, 2-
bit)
%W %W and %H respectively represent the width and height in which an alarm image of the
%H specified log number (LNO) is displayed.
(%w, %h, %W, %H ) = (640, 480, 640, 480) or (640, 240, 640, 480) or (320, 240, 320,
Description
240) or (160, 120, 160, 120)