Panasonic WJ-NT104 Operating Instructions Manual page 42

u RESOLUTION
Set a pixel number (resolution) for images from the WJ-
NT104. The same value is applied for live images and
alarm images.
The factory default setting is 320x240 pixels
i IMAGE QUALITY
Set the image quality for images from the WJ-NT104.
The same value is applied for live images and alarm
images.
The factory default setting is FINE.
o FRAME SPEED CONTROL FOR PULL MODE
Set a frame speed for PULL mode.
1 is the highest frame speed. The higher the number,
the lower the frame speed.
The factory default setting is 3.
42
!0 FRAME SPEED CONTROL FOR PUSH MODE
Set a frame speed for PUSH mode.
This mode is supported by the Netscape Navigator
browser only.
1 is the highest frame speed. The higher the number,
the lower the frame speed.
The factory default setting is 3.
!1 OUTPUT DATA RATE CONTROL
Selecting a lower data rate reduces the possibility if a
network traffic jam.
The factory default setting is MAX.
!2 CAMERA CONTROL SELECT
A camera control cable can be selected for each chan-
nel.
The factory default setting is COAXIAL.
u
i
o
!0
!1
!2