Enhancing The Security Function - Konica Minolta bizhub C3110 User Manual

2.2

Enhancing the Security Function

2.2 Enhancing the Security Function
When access to the machine by the Administrator of the machine through the Administrator Settings from
the control panel is authenticated, the machine enables setting of the Enhanced Security Mode that allows
settings for enhancing each of different security functions to be converted all at once.
In the Enhanced Security Mode, the machine allows selection of whether to use the Enhanced Security Mode
or not. When the Enhanced Security Mode is set to [ON], the security function is enhanced by automatically
setting such functions as that which determines whether each password meets predetermined requirements.
The following settings must first be made before the Enhanced Security Mode is set to [ON].
Settings to be Made in Advance
Administrator Password
Encryption Key
User Authentication
Authentication Device Settings
Certificate for SSL
Password Rules
Setting the Enhanced Security Mode to [ON] changes the setting values of the following functions.
Function Name
Public Access
Print without Authentica-
tion
User Name List
SSL
SSL Encryption Strength
FTP Server
SNMPv1/v2c
SNMP v3 Security Level
and auth-password/priv-
password
(SNMP v3 Write User)
Administrator Password
Change Via Network
(Pagescope Web Con-
nection)
Telnet
NOTICE
When Password Rules is set to [ON] the characters and the number of digits used for each password are
restricted. For details of the Password Rules, see page 1-9.
Turning ON the Enhanced Security Mode does not enable the ID & Print function. Enable the function man-
ually to protect image files. For details of the ID & Print function, see page 2-9.
bizhub C3110
Description
An 8-digit password that meets the Password Rules.
The factory setting is "12345678."
Set the Encryption Key.
Set to [Device].
Set to [Card Authentication + Password].
Register the self-signed certificate for SSL communications.
Set to [ON].
Factory Setting When Enhanced Security Mode is set to [ON]
Restrict Restrict (not to be changed)
Restrict Restrict (not to be changed)
OFF OFF (not to be changed)
OFF ON (not to be changed)
AES-256, 3DES, AES-256, 3DES (not to be changed to one containing
RC4-128, strength lower than AES/3DES)
DES, RC4-40
Enable Disable
(Selection can be made between [Enable] and [Disable])
Read/Write en- Only Read is enabled (not to be changed)
abled
auth-password/ auth-password/priv-password
priv-password (Selection can be made between [auth-password] and
[auth-password/priv-password])
Enabled Restrict
Enable Disable (not to be changed)
2
2-5