Table of Contents
Advertisement
Installation (Local printing)
–
When selecting the [Local printer attached to this computer], turn
"off" [Automatically detect and install my Plug and Play printer] set-
ting "off".
–
When personal computers or workstations are connected to the
network and you want to print via the network, select [A network
printer, or a printer attached to another computer]. In case, refer to
"Installing to Windows 2000/XP/Server 2003(PCL6/PPD)" on Page
5-13.
7
Click [Next].
The window to select the printer
port appears.
8
Select the port connecting the printer from the list displayed by clicking
[▼] at the side of the [Use the following port:] box.
–
Select the port to which the printing system is directly connected.
–
If you want to print directly to the printing system via the network,
select the LPR port. For details, refer to "Installing to Windows
2000/XP/Server 2003(PCL6/PPD)" on Page 5-13.
9
Click [Next].
The window to select the printer manufacturer and model appears.
10
Click [Have Disk].
The [Install From Disk] window
appears.
IC-203
4
4-18
Advertisement
Table of Contents
