Table of Contents
Advertisement
PostScript PPD Printer Driver setting (Mac OS 9)
4
Click [Print].
–
When [Wait Mode] is selected, it stops without being printed.
–
When [Proof and Print] is selected, only one part is printed and it
stops.
On the copier's control panel, the Mode Check screen appears.
5
In case of [Proof and Print], [Proof Stop] blinks on the left above the
copier touch panel screen. Press [Proof Stop].
Mode Check screen appears on the control panel of copier.
6
Confirm the current settings.
If you do not change any setting,
proceed to the step 9.
7
If necessary, press the [Change] to change settings.
8
Change the settings and press the [OK].
Mode Check screen will be restored.
9
Press [START] to resume the rest of the print job.
Resolution
Displays the resolution of the printer (600 dpi)
Smoothing
Prints the curved section of characters and images smoothly.
- [Type 1] is suitable for printing the diagonal lines of normal characters
and graphics.
- [Type 2] is suitable for printing the curved sections of normal characters.
- [Type 3] is suitable for printing the curved sections of ornamental writings
and fine characters.
- When [Off] is selected, no smoothing operation is made.
IC-203
Smoothing
11
11-34
Advertisement
Table of Contents
