Konica Minolta IC-203 User Manual page 35

Installation (Installer)
4
Select [Install printers/MFPs] and
click [Next].
[Select Printer/MFP to install] win-
dow appears.
5
Select and install a copier. A copier can be selected by either way of
two as shown below.
– Selection from list detected
When a copier is detected on the
TCP/IP network, for instance, the
driver name (KONICA MINOLTA
920 PCL) is displayed on the
screen as shown below. Then
select [Select Printers/MFPs to
Install from the List. You can se-
lect Multiple Printers/MFPs], turn
the check box on the left of the
driver name to ON and click
[Next].
– [Confirm Installation Settings] window is displayed.
– If no copier is detected, click the
[Search Setting] button, enter the
IP address and subnet mask and
click the [Search].
– When specifying manually
To specify a unit manually, select
[Specify the Printer/MFP Except
for the Above] and click the [Re-
fer to].
– [Manual Settings] window ap-
pears.
IC-203
3
3-2