Table of Contents
Advertisement
PostScript PPD Printer Driver setting (Mac OS X)
Output - Output Method - Wait Mode/Proof and Print
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Select [Security] from pop-up menu.
3
Select [Wait Mode] or [Proof and Print] in the [Output Method].
4
Click [Print] to perform printing from the application.
–
When the [Wait Mode] is selected, it stops without being printed.
–
When the [Proof and Print] is selected, only one part is printed and
it stops.
On the copier's control panel, the Mode Check screen appears.
5
In case of [Proof and Print], [Proof Stop] blinks on the left above the
copier touch panel screen. Press [Proof Stop].
Mode Check screen appears on the control panel of copier.
6
Confirm the current settings.
–
If you do not change any setting,
proceed to the step 9.
7
If necessary, press [Change] to change settings.
8
Change the settings and press [OK].
The Mode Check screen will be restored.
9
Press [START] to resume the rest of the print job.
IC-203
12
12-19
Advertisement
Table of Contents
