Konica Minolta IC-203 User Manual page 231

PostScript PPD Printer Driver setting (Windows)
7
Confirm the current settings.
– If you do not change any set-
ting, proceed to the step 10.
8
If necessary, press the [Change] to change settings.
9
Change the settings and press the [OK].
The Mode Check screen will be restored.
10
Press [START] to resume the rest of the print job.
Smoothing
Prints the curved section of characters and images smoothly, when this
printing system is used.
- [Type1] is suitable for printing the diagonal lines of normal characters and
graphics.
- [Type2] is suitable for printing the curved sections of normal characters.
- [Type3] is suitable for printing the curved sections of ornamental writings
and fine characters.
- When [Off] is selected, no smoothing operation is made.
IC-203
Smoothing
9
9-32