Ricoh MP 6503 User Manual page 189

Message
"Data Storage Error"
"Error has occurred."
"Exceeded Max. Stored
Files"
"Exceeded Max. Stored
Pages"
"Failed to obtain file system." PDF direct printing could not
"File system is full."
"Folding Unit Error."
"I/O buffer overflow."
Cause
You tried to print a Sample
Print, Locked Print, Hold
Print, or Stored Print file, or
to store a file in the
Document Server when the
hard disk was
malfunctioning.
A syntax error, etc.,
occurred.
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum file capacity was
exceeded.
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.
be performed because the
file system could not be
obtained.
PDF file does not print out
because the capacity of the
file system is full.
There is a problem with the
Multi-Folding Unit.
An input buffer overflow
occurred.
Messages Displayed When You Use the Printer Function
Solution
Contact your service representative.
Check that the PDF file is valid.
Delete unneeded files stored on the
machine.
Delete unneeded files stored on the
machine.
Reduce the number of pages to print.
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
Delete all unnecessary files from the
hard disk, or decrease the file size sent
to the machine.
Contact your service representative.
• In [Printer Features], under [Host
Interface], select [I/O Buffer],
and then set the maximum buffer
size to a larger value.
• Reduce the number of files being
sent to the machine.
187