When There Is A Problem Scanning Or Storing Originals - Ricoh MP C6502 series Operation Manual

Message
"Self checking..."

When There Is a Problem Scanning or Storing Originals

Message
"Cannot detect original size.
Select scan size."
"Captured file exceeded
max. number of pages per
file. Cannot send the
scanned data."
"Original(s) is being
scanned for a different
function."
Causes
The machine is performing
image adjustment
operations.
Causes
The machine failed to detect
the size of the original.
The maximum number of
pages per file has been
exceeded.
Another function of the
machine is being used.
When Other Messages Appear
Solutions
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
get ready.
Solutions
• Place the original correctly.
• Specify the scan size, and then
place the originals again. For
details about the settings for when
fax function is being used, see
"Scan Settings", Fax
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the ADF
triggers the automatic original
size detection process. Lift the
ADF by 30 degrees or more.
Reduce the number of pages in the
transmitted file, and then resend the
file. For details about the maximum
number of pages per file, see "Storage
Function", Scan .
Cancel the job in progress. Press [Exit],
and then press the [Stop] key. Follow
the instructions in the message that
appears and exit the function that is
running.
.
227