Ricoh MP 6503 User Manual page 140

9. Adding Paper and Toner
Paper type and weight
OHP transparencies
Translucent paper
Label paper (adhesive labels)
*1 Select the paper size. For copier mode, see "Copying from the Bypass Tray", Copy/ Document Server.
For printer mode, see page 127 "Specifying regular sizes using the control panel".
*2 Enter the paper size. For copier mode, see "Copying from the Bypass Tray", Copy/ Document Server.
For printer mode, see page 128 "Specifying a custom size paper using the control panel".
*3 In printer or facsimile mode, the maximum horizontal length of the custom size is 1,260 mm (49.60
inches). If you want to print on paper with a vertical length of 600–1,260 mm (23.62–49.60 inches),
contact your service representative. If you want to load paper with a vertical length of 600 mm (23.52
inches) or longer in the bypass tray, it must have a horizontal width of 305 mm (12.1 inches) or less.
*4 When paper larger than 432 mm (17 inches) in size is used, the paper may become wrinkled, may not
be fed into the machine, or may cause paper jams.
*5 Printing on thick paper 1 - 4 of A5 is not supported.
138
Paper size
• When no finisher is
installed
1
A4 , 8 / × 11
2
• When a finisher is
installed
A4
A3 , A4 , B4 JIS ,
B5 JIS
• When no finisher is
installed
B4 JIS , A4
• When a finisher is
installed
A4
Paper capacity
50 sheets
50 sheets
1 sheet