Installing The Power Interposer Board - Dell NX430 Owner's Manual

Figure 39. Removing and installing the power interposer board
1. standoffs (2)
3. power interposer board
5. 28 pin cable to system board
7. 8 pin cable to system board
Next steps
1. Install the power interposer board.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system

Installing the power interposer board

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
2. 10 pin cable to hard drive backplane
4. screw (2)
6. 4 pin cable to system board
115