Table of Contents
Advertisement
5.
Reconnect the system to its electrical outlet and turn on the system, including any attached
peripherals.
6.
Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet.
7.
Open the system.
8.
Move the jumper on the system board jumper from pins 2 and 4 to pins 4 and 6.
9.
Close the system.
10. Reconnect the system to its electrical outlet and turn on the system, including any attached
peripherals.
11. Assign a new system and/or setup password.
128
Advertisement
Table of Contents
Troubleshooting
