Dell NX430 Owner's Manual page 13

Item Indicator, button, or
connector
6 USB connectors
7 Ethernet connectors
8 System identification
button
9 System identification
connector
10 Video connector
Icon Description
Enable you to connect USB devices to the system.
These ports are USB 3.0-compliant.
Enable you to connect Integrated 10/100/1000
Mbps NIC connectors.
Enables you to locate a particular system within a
rack. The identification buttons are on the front
and back panels. When one of these buttons is
pressed, the LCD panel on the front and the
system status indicator on the back flash until one
of the buttons is pressed again.
Press the system identification button to turn the
system ID on or off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup),
press and hold the button for more than 15
seconds.
Connects the optional system status indicator
assembly through the optional cable management
arm.
Enables you to connect a VGA display to the
system.
13