NOTE: To locate the TPM connector on the system board, see the System board connectors
section.
2.
Align the edge connectors on the TPM with the slot on the TPM connector.
3.
Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the system
board.
4.
Press the plastic bolt until the bolt snaps into place.
Figure 40. Installing the TPM
1.
TPM
3.
slot on the TPM connector
5.
slot on the system board
Next steps
1.
Install the system board.
2.
Follow the procedure listed in the After working inside your system section.
Related Links
System board connectors
Safety instructions
Before working inside your system
After working inside your system
Reenabling the TPM for BitLocker users
Initialize the TPM.
For more information about initializing the TPM, see
cc753140.aspx.
The TPM Status changes to Enabled, Activated.
Reenabling the TPM for TXT users
1.
While booting your system, press F2 to enter System Setup.
2.
On the System Setup Main Menu screen, click System BIOS → System Security Settings.
2.
TPM connector
4.
plastic bolt
http://technet.microsoft.com/en-us/library/
117