Advertisement
Wired remote controller installation
tracking your indoor unit from the wired remote controller
Displays the total number of indoor units searched
1 . Tracking of your wired remote controller will automatically start when you turn on the power after installation .
2 . If you want to perform tracking again after installation, then press the top right corner (hidden button) of the display for
more than 7 seconds .
- The system will reset, and tracking will start again .
3 . During tracking, the total number of currently searched indoor units will be displayed .
4 . It may take about 3 minutes at initial installation or when you re-set the power master setting .
• If you want to reset the system of your wired remote controller, then press the top right corner (hidden button) of
the display for more than 7 seconds .
CaUtION
MWR-SH10N_IM_DB68-05567A-01_EN.indd 8
ENGLISH-8
Indicates tracking in progress
2015/11/19 19:44:11
Advertisement
