Advertisement
Controlling 2-remote controller
2-Remote controller is controlling one indoor unit or a group of indoor units with two remote controllers .
Outdoor unit
COM1(F1, F2)
COM2(F3, F4)
Wired remote
controller (Master)
• For the slave wired remote controller settings, please refer to the sections about the additional functions of the
wired remote controller . (Refer to 'Additional Functions of your wired remote controller' main menu 1 sub
CaUtION
menu 1, master/slave setting)
• You can only use several functions on the master setting .
- On-off timer
- Outing
- Easy tuning
- Displays the total number of indoor units
- Adjust temperature and select mode when relative temperature is displayed
• Wired remote controller without a master/slave setting is properly connected, but If you need to set a specific
wired remote controller as a master, you have to set master/slave in the service mode 1-1 .
MWR-SH10N_IM_DB68-05567A-01_EN.indd 11
Indoor unit
Wired remote
controller (Slave)
ENGLISH-11
2015/11/19 19:44:12
Advertisement
