Advertisement
Wired remote controller installation
Wired remote controller error codes
Display
Description
Communication error between wired remote controller and indoor units
(When communication is lost for over 3 minutes after detecting the indoor unit and the wired remote
controller)
No communication between Master(Main) and Slave(Sub) wired remote controllers
No communication between wired remote controller and indoor units
(Including communication error between indoor units and outdoor units)
- Exceeded maximum number of indoor unit connection (16 indoor units)
- Reset is required after checking the number of indoor units
Two or more wired remote controllers set as slave(sub)
Temperature sensor open/short error
EEPROM error
• For the error codes for your indoor/outdoor units, refer to the installation manual of each device .
CaUtION
ENGLISH-14
MWR-SH10N_IM_DB68-05567A-01_EN.indd 14
2015/11/19 19:44:13
Advertisement
