3. Use a VT100-compatible asynchronous terminal or PC to set up management
access to the unit. Insert the DB9 end of an EIA-232 cable into the router's COM
port. Tighten the screws on each side of the connector. Insert the other end into the
terminal or PC.
The terminal or PC's configuration must be compatible with the router's. Refer to the
Configuration Setup
procedure on
page 15
of
. If connecting an external modem to
Connecting an External Modem
the COM port, refer to
on page 24.
COM
P O W
E R
C O M
E T H E
R N E T
N E T
01-16983
9