Table of Contents
Advertisement
Procedure
To access the menu-driven user interface:
1. Verify the terminal or PC's configuration:
— Data Rate is set to 19.2 kbps.
— Character Length is set to 8 data bits.
— Parity is set to None.
— Stop Bits is set to 1.
— Flow Control is set to None.
2. Press Enter to display the Main Menu.
main
Device Name: Node A
-----------------------------------------------------------------------------
Ctrl-a to access these functions, Shift-r to access the Router's CLI.
If the Main Menu does not appear:
T
Press Enter again
T
Check the terminal or PC settings
T
Refer to Troubleshooting in the User's Guide
MAIN MENU
Status
Test
Configuration
Control
Easy Install
15
9788-RtrSLV
6/05/2001 00:02
Exit
Advertisement
Table of Contents
