Print-Quality Problems; Light Prints - Xerox Phaser 5550 User Manual

Print-Quality Problems

Your printer is designed to produce consistently high-quality prints. If you observe
print-quality problems, use the information in this topic to diagnose the problem.
For best results, use only Xerox Printing Media. For information on supported paper types and
weights, see
Caution:
media is not covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local representative for details.

Light Prints

The overall image is lighter than normal.
The paper may be damp.
You may be using Draft mode.
The toner level may be low.
Drum cartridge near end of life.
Downloaded From ManualsPrinter.com Manuals
Supported Paper and Media
Damage caused by using unsupported paper, transparencies, and other specialty
Possible Causes
Phaser® 5550 Printer
on page 4-2.
Solutions
Replace the paper.
Turn off Draft mode.
If the toner cartridge is low on toner, replace it.
Replace drum cartridge.
6-58
Print-Quality Problems