Manual Address Assignment - Xerox Phaser 5550 User Manual

Manual Address Assignment

A manually entered IPv6 address is used in addition to any other IPv6 addresses. To create a
manual address, enter the IPv6 address and prefix length in the fields provided in
CentreWare IS. The default prefix length is 64.
To manually set the IPv6 address, use one of the following options:
■
■
Setting the IPv6 Address with the Control Panel
To set the IPv6 address on the control panel:
1.
2.
3.
4.
5.
6.
7.
Setting the IPv6 Address Using CentreWare IS
To manually set the IPv6 address using CentreWare IS:
1.
2.
3.
4.
5.
6.
7.
Downloaded From ManualsPrinter.com Manuals
The printer's control panel
CentreWare IS
Select , and then press the OK button.
Printer Setup
Select
Connection Setup
Select , and then press the OK button.
Network Setup
Select , and then press the OK button.
TCP/IPv6 Setup
Select , and then press the OK button to turn manual addressing on.
Manual Address
Select , and then press the OK button.
Manual Address
To set the address:
a.
Use the Up Arrow and Down Arrow buttons to set the first number, and then press
the OK button.
b. Continue setting individual numbers, pressing the OK button after setting each one.
When you get to the end of the address, press the OK button to return to the menu.
Launch your web browser.
Enter your printer's IP address in the browser's Address field.
Click Properties.
Select the Protocols folder on the left navigation panel, and then click TCP/IP.
Click the TCP/IP (v6) button.
In the Manual Address Assignment field, select Use this address, and then type the
address.
Click the Save Changes button at the bottom of the page.
, and then press the OK button.
Phaser® 5550 Printer
3-30
IPv6