Xerox Phaser 5550 User Manual page 175

3.
4.
5.
Downloaded From ManualsPrinter.com Manuals
Push the tray completely into the printer.
Specify the size of the paper by doing the following:
a. In the control panel menus, select
b.
Select
Paper Handling Setup
c.
Select Tray [2 - 5] Setup
d. Select
Auto Sensed, Custom
e. If you selected
Custom
Width , press the OK button, scroll to the width of the paper, and then press the
OK button. Select
Custom Height
paper, and then press the OK button.
Open Door A.
Warning:
Use caution; some components inside Door A may be hot.
, and then press the OK button.
Printer Setup
, and then press the OK button.
, and then press the OK button.
, or a listed paper size, and then press the OK button.
, specify the width and height of the paper. Select
, press the OK button, scroll to the height of the
Phaser® 5550 Printer
6-31
Clearing Paper Jams
5550-032
Custom
5550-001