Tray Setup - Xerox Phaser 5550 User Manual

Tray Setup

When loading paper, transparencies, or other specialty media in a tray:
■
■
■
■
■
■
For the Online Support Assistant, go to www.xerox.com/office/5550support.
Tray 1 (MPT)
Trays 2-5
Downloaded From ManualsPrinter.com Manuals
Adjust the width and length guides, if loading paper with a different width or length.
Fan the paper, transparencies, or other specialty media before loading in the paper tray.
Do not overload the paper tray. Do not load paper or transparencies above the fill lines
inside the tray.
Slide the length and side guides firmly against the paper or other specialty media.
Push the tray completely to the back of printer.
Set the paper size and type if prompted by the control panel.
MAX
Tray 1 (MPT) Long-Edge Feed
(Recommended)
Trays 2-5 Long-Edge Feed
(Recommended)
5550-100
Tray 1 (MPT) Short-Edge Feed
5550-102
Trays 2-5 Short-Edge Feed
Phaser® 5550 Printer
4-7
Supported Paper and Media
MAX MAX
5550-101
5550-106
5550-101