Removing the WWAN-antenna
connectors
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Follow step 1 to step 6 in
2
Remove the
3
Remove the
Prerequisites
1
Follow step 1 to step 6 in
2
Remove the
Procedure
1
Remove the nuts and washers that secure the WWAN-antennas
connectors one and two to the chassis.
Before working inside your Embedded Box
"Removing the back
PCI/PCIe card
(if installed).
riser
card.
"Removing the back
PCI/PCIe card
(if installed).
PC. For more safety best practices,
www.dell.com/
cover".
cover".
PC.
After
61