Replacing The Interposer Board; Procedure; Post-Requisites - Dell Embedded Box PC 5000 Service Manual

Replacing the interposer board

WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the interposer board with the screw holes on
the solid-state drive card bracket.
2 Replace the screws that secure the interposer board to the solid-state
drive card bracket.

Post-requisites

1 Replace the solid-state drive in to
2 Replace the drives in to the hard-drive
3 Follow step 2 to step 8 in
34
Before working inside your Embedded Box
bracket.
"Replacing the back
PC. For more safety best practices,
www.dell.com/
cage.
cover".
PC.
After