Replacing The Solid-State Drive In To Bracket; Prerequisites; Procedure - Dell Embedded Box PC 5000 Service Manual

Replacing the solid-state drive
in to bracket
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the solid-state drive.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the

Procedure

NOTE: Embedded Box PC is shipped with hard drive, solid-state drive, or
both, depending on the configuration ordered.
1 Remove the screw that secures the solid-state drive to the solid-state
drive bracket.
Before working inside your Embedded Box
"Removing the back
drives from the hard-drive
PC. For more safety best practices,
www.dell.com/
cover".
cage.
PC.
After
29