Replacing the hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care
when handling the Solid-state/hard drive.
Procedure
1
Align the screw holes on the hard-drive cage with the screw holes on the
back cover.
2
Replace the screws that secure the hard-drive cage to the back cover.
Post-requisites
Follow step 2 to step 8 in
24
Before working inside your Embedded Box
"Replacing the back
PC. For more safety best practices,
www.dell.com/
cover".
PC.
After