Removing The Wlan-Antenna Connectors; Prerequisites; Procedure - Dell Embedded Box PC 5000 Service Manual

Removing the WLAN-antenna
connectors
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the

Procedure

1 Remove the nuts and washers that secure the WLAN-antenna connectors
one and two to the chassis.
52
Before working inside your Embedded Box
"Removing the back
PCI/PCIe card (if installed).
PC. For more safety best practices,
www.dell.com/
cover".
PC.
After