Prepare The Printer - DataCard CD800 Quick Install Manual

CLM Laminator Quick Install and Upgrade Guide

3. Prepare the Printer

Do the following to prepare the printer to connect to the CLM
laminator.
•
•
Remove, Replace, or Modify the Reject Card
Tray
The reject card tray must be removed, replaced, or modified
to allow the card to enter the CLM laminator.
CD800 Printers Without Locks:
a. Remove the reject card tray from the printer. Keep the
tray in a safe place in case you need to return it to the
printer in the future.
b. Continue with "Remove the Interconnect Port Tab" on
page 7.
5
You cannot attach a printer with a multi-hopper to
the laminator.
If you have installed a large output hopper, you
must remove it before connecting the printer to
the laminator.
CLM Laminator