Guest Network - TP-Link TD-W8961N User Manual

TD-W8961N

Note:
To enable the function, there should not be any IPv6 WAN connections.

4.2.5 Guest Network

Go to Interface Setup→Guest Network, and you will see the Guest Network screen. This feature
allows you to create a separate network for your guests without allowing them to access your
main network and the computers connected to it.
You can enable or disable Guest Network. The default setting is disabled. When you enable this
function, you could set wireless parameters for Guest Network.
Guest SSID: The guest network name. When setting up a Guest network, it is strongly

recommended to use a name that easily distinguishes it from your primary network.
Authentication Type: Select the Authentication Type from the drop-down list.

Encryption: You can select either AUTO, AES or TKIP.

Wireless Password: You may personalize your guest network password by entering a new

300Mbps Wireless N ADSL2+ Modem Router User Guide
38