Specifications; Wj-Nd400 - Panasonic WJ-ND400 Installation Manual

ND400_Basic.book 57 ページ ２００８年４月８日 火曜日 午後３時５９分

Specifications

WJ-ND400

● General Specifications
Power source
Power consumption
Ambient operating
temperature
Ambient operating
humidity
Maximum operating
altitude
Dimensions
Weight
● HDD (One HDD is provided at the factory. Contact your dealer to purchase additional HDD.)
HDD
Type/function
● Input/output
External storage
Alarm/Control connector
Alarm connector
Client PC port
Camera port
Maintenance port
*1 No voltage make contact input +5 V pull-up, 150 kΩ
*2 Maximum output of open collector is DC 24 V, 100 mA
*3 High (+5 V to +12 V, max. 6.3 mA)
*4 52 kΩ +5-V pull-up, output current -100 mA, no voltage make contact input
*5 Max. 200 mA
NTSC model: 120 V AC, 60 Hz
PAL model: 220 V - 240 V AC, 50 Hz
170 W
+5 ºC to +45 ºC {41 °F - 113 °F}
5 % to 90 % (non condensing)
2 000 m {6 562 feet} above sea level
430 mm (W) x 132 mm (H) x 400 mm (D) {16-15/16" (W) x 5-3/16" (H) x15-12/16" (D)}
(excluding rubber feet and projections)
14 kg {30.9 lbs}
When 1 HDD is
installed
20 kg {44.15 lbs}
When 9 HDDs are
installed
3.5" HDD x 1(Up to 9 HDDs)
RAID5 mode available (only when 3 or more HDDs are installed)
RAID6 mode available (only when 4 or more HDDs are installed)
High-speed serial interface, 1.5 Gbps (theoretical value), x5
*1
Alarm input 8-16 , Network error output
Emergency recording input
Camera error output
adjustment input/output
Alarm suspension input
*1
switching , +5 V output
(D-sub 25-pin)
*1
Alarm input 1-7 , Alarm input 17-32
10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
10BASE-T (RJ-45)
*2
, Alarm reset input
*1
, Available disk space warning output
*2 *2
, Error output , Power outage recovery completion output
*4 *2
, Alarm output ,
*1
, Power outage detection input
*5
*1
(D-sub 25-pin)
*1
,
*2 *2
, HDD error output ,
*3
, Time
*1
, External recording mode
57