Setting Up The Rack; Rack Mounting; Rack Mounting Brackets Fixing Screw; Handle For Rack Mounting Bracket - Panasonic WJ-ND400 Installation Manual

chap3.fm 23 ページ ２００８年４月８日 火曜日 午後５時２２分

Setting up the Rack

Rack Mounting

Install the recorder into an EIA standard compliant rack.
EIA standard compliant : an EIA-standard 19"rack, depth
product 550 mm or more
(locally procured)
Note:
• Installation in a rack requires four M5 x 12 screws.
1
Remove the 5 rubber feet from the underside of the
recorder.
Use a screwdriver to remove the screws holding the rubber
feet.
2
Attach the handle for rack mounting bracket to the rack
mounting brackets.
Use the four handle fixing screws for rack mounting bracket
and washers to secure them.
Handle fixing screws for
rack mounting bracket

Washer

Rack mounting bracket
Washer

Handle for rack mounting bracket

3
Attach the rack mounting bracket to both sides of the
recorder.
Secure them using the six rack mounting bracket fixing
screws.
Rack mounting bracket fixing screws (provided)
Handle for rack
mounting bracket
Rack mounting brackets (provided)
Remove rubber feet
Handle for rack
mounting bracket
4
Install the recorder in the rack.
Secure using the rack mounting screws.
Rack mounting screws (M5 x 12, locally procured)
Important:
• Ensure that the temperature inside the rack does not exceed
45 ºC {113 ºF}.
• During installation, we recommend installing a fan to keep the
temperature in the rack below 30 ºC {86 ºF}.
• When installing the recorder in the rack, leave a space of
1 unit (44 mm {1.73"}) above and below each unit.
• Leave space between racks and ensure proper ventilation
around the racks.
23