Ricoh Aficio SP 100SF Service Manual page 186

6. Troubleshooting
184
Sets the resolution for fax scanning.
• Standard. (Default) 8x3.85 dots/mm
• Detail. 8x7.7 dots/mm
• Photo. 8x7.7 dots/mm
Note: The Erase Background setting (see below) is disabled
when "Photo" is selected.
Erase Background
Erases spurious background dots and other imperfections during
scanning.
On (Default) / Off
Note: This features does not operate when "Photo" is selected for
"Erase Background" above.
Density
Adjusts the overall image density for scanning originals for fax
sending. Three settings (reflected in the progress bar) are
available.
Lighter, Normal (Default), Darker
Pause Time
Specifies the length of time to pause between digits of a fax
number when dialing.
Time (1-15 sec.) Default: 3 sec.
Auto Redial
Determines whether the machine automatically redials after
transmission failed because the remote fax was busy.
Off/On (Default)
The number of redial attempts and time interval between attempts
to redial are determined by the Service Mode setting. (Defaults: 5
min./3 times)
Print Fax Header