Further Information - Siemens SITRANS TH400 Operating Instructions Manual

Introduction

1.3 Further information

1.3 Further information
Information
The contents of these instructions shall not become part of or modify any prior or existing
agreement, commitment or legal relationship. All obligations on the part of Siemens AG are
contained in the respective sales contract which also contains the complete and solely
applicable warranty conditions. Any statements contained herein do not create new
warranties or modify the existing warranty.
The content reflects the technical status at the time of printing. We reserve the right to make
technical changes in the course of further development.
Worldwide contact person
If you need more information or have particular problems which are not covered sufficiently
by the operating instructions, get in touch with your contact person. You can find contact
information for your local contact person in the Internet.
Product information on the Internet
The Programming Manual is an integral part of the companion CD, which may be ordered
separately. In addition, the Programming Manual is available on the Internet on the Siemens
homepage.
On the CD you will also find the technical data sheet containing the ordering data, the Device
Install software for SIMATIC PDM for subsequent installation and the required software.
See also
Instructions and Manuals (http://www.siemens.com/processinstrumentation/documentation)
Product information on SITRANS T in the Internet (http://www.siemens.com/sitranst)
Contacts (http://www.siemens.com/processinstrumentation/contacts)
8
Operating Instructions, 02/2007, A5E01018688-01
SITRANS TH400