Chapter 6
Human-Machine Interface (HMI)
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 25: Event Log menu
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 26: Event Log menu
72
6:2.5 Event Log menu
The Event Log menu is used to check the event log in the
softstarter. When entering this menu the 21 latest events in
the log are presented, in chronological order with the latest
event as No. 1, the second latest as No. 2 etc.
The events are presented with "type of event", date and time.
Use navigation keys to view all entries in the event log.
6:2.6 Status Information menu
The Status information menu is used to present various
information.
The information is presented one by one on the top row.
Use navigation keys to present all information.
Displayed phase currents L1, L2, and L3 are the delta
currents if unit is connected inside delta, otherwise line
current.
Display text
Frequency
Phase seq.
Connection
Phase L1
Phase L2
Phase L3
Line Voltage
cosPhi
P kW
P hp
Q kVAr
S kVA
Run Time
No. Of Starts
SW Ver. CU
SW Ver. FU
1
SW Ver. KP
DB version
MAC Address
LV Board No
1) only if connected
Function
Measured frequency.
Phase sequence indication.
Type of connection, In Line/Inside Delta.
Phase current L1.
Phase current L2.
Phase current L3.
The incoming line voltage [U].
Power factor.
Active power [kW].
Active power [hp]
Reactive power [kVAr]
Apparent power [kVA]
Total run time of the motor.
Counted number of starts.
Software version CU.
Software version FU.
Software version Ext. keypad.
Database version
Internal addressing.
Serial No of the LV PCB.
1SFC132003M0201