Initial Voltage, First Sequence; Current Limit, First Sequence; Setting Current, First Sequence - ABB PST30 Installation And Commissioning Manual

Chapter 10
Functions
168

10:67 Initial voltage, first sequence

Path in menu:
Menu/SETTINGS/Functional Settings/
Seq Start/1st Seq. Param./Init Volt1
This parameter makes it possible to set the initial voltage for
the first parameter set
Parameter Default value Setting range
text
Init Volt1 30%

10:68 Current limit, first sequence

Path in menu:
Menu/SETTINGS/Functional Settings/
Seq Start/1st Seq. Param./Curr Lim1
This parameter makes it possible to set the current limit level
for the first parameter set.
Parameter Default value
text
Curr Lim1 4 x I
e

10:69 Setting current, first sequence

Path in menu:
Menu/SETTINGS/Functional Settings/
Seq Start/1st Seq. Param./1st Set Ie
This parameter makes it possible to set the rated motor
current for the first parameter set
Parameter Default value Setting range
text
1st Set Ie Ir
Description
30...70% First sequence,
initial voltage for
start ramp
Setting range Description
2.0...7.0 x I First sequence,
e
current limit
Description
9...1207A divided First sequence,
into 19 overlap- motor rated cur-
ping ranges rent
1SFC132003M0201