Use The Dt-4572 Front Panel To Get The Management Ip Address And Firmware Information; Use The Http Interface To Find The Firmware Information - Comtech EF Data DT-4572 Installation And Operation Manual

DT-4572 X-Band Down Converter
Firmware Update
5.2.3.1 Use the DT-4572 Front Panel to Get the Management IP
Address and Firmware information
Chapter 6. FRONT PANEL OPERATION
Using the unit front panel:
• You may view find the factory-assigned Management IP Address within
the CONFIG  REMOTE ETHERNET  ADDRESS menu branch:
IP Address/Range:
XXX.XXX.XXX.XXX/YY
• You may view the current Firmware M&C version at the top-level menu
of the front panel display (press the [CLEAR] key several times):
SW VER X.X.X
• You may view the detailed firmware information within the UTILITY 
FIRMWARE INFO  IMAGE#1 or IMAGE#2  BULK menu branches:
Image#X: BULK APP FPGA
Bulk#X: FW-0000202x
X.X.X. MM/DD/YY

5.2.3.2 Use the HTTP Interface to Find the Firmware Information

Chapter 7. ETHERNET INTERFACE OPERATION
Do these steps:
1. Go to either of these pages to review the firmware information:
• The 'Firmware Information' section of the 'Config | Utility' page
provides the firmware details as Boot, Bulk1, and Bulk2, as shown
in this example:
DT_4572
SN#########
5–4
MN/DT4572.IOM
Revision 1