DT-4572 X-Band Down Converter
Ethernet Interface Operation
The factory defaults for these names/passwords are:
• Admin
• Read/Write
• Read Only
Failure to enter the correct User name and Password will return you to
the Login window. Should you continue to specify an invalid User name
or Password, the message "You do not have security privilege to access
this area." displays.
Otherwise, upon entry of the valid IP address and login information
DT-4572 HTTP Interface "splash" page displays, similar to the example
shown in Figure 7-4. The firmware version in this example may differ
from your setup.
Figure 7-4. HTTP Interface "Splash" Page Example
comtech/comtech
opcenter/1234
monitor/1234
7–8
MN/DT4572.IOM
Revision 1