Intro Check - Teac DC-D6300 Owner's Manual

Écoute de disque
2
1
Avant l'utilisation, déserrer complètement la visse de transport
en la tournant vers la droite utilisant une pièce de monnaie.
Détachez le protecteur de l'aiguille (couvercle plastique blanc)
1 Appuyez sur le bouton PHONO.
2 Doucement soulever le couvercle. Prendre soin de ne
pas coincer vos doigts.
3
Déposez le disque sur la table tournante.
42
3
visse
9
6 8
5
7
4
adapteur 45 RPM
4 Choisir la vitesse.
5
Doucement poussez l'attache vers la droite pour
relâcher le bras.
attache
6
Soulever le levier de repérage pour soulever le bras de
son appui.
bras
levier de repérage
To check the programmed order
In the stop mode, press the PROGRAM button repeatedly.
The track number and program number will be shown on the
display.
To add a track to the end of the program
In the stop mode, press the PROGRAM button repeatedly
until "00" appears on the display. Select a track number
using the SKIP button and then press the PROGRAM button.
The track is added to the end of the program.
To overwrite the program
In the stop mode, press the PROGRAM button repeatedly
until the program number to be changed appears on the
display.
Select a new track number using the SKIP button and then
press the PROGRAM button.
To clear program
To clear the programmed contents, press the PROGRAM and
the STOP button in the stop mode.
< If the OPEN/CLOSE button is pressed, the programmed
contents will also be cleared.
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.

Intro Check

Press the INTRO button in the stop mode. The beginning of all
the tracks of all the discs is played for 10 seconds each. When
a track you want to listen to is found, press the INTRO button
to resume normal playback.
< To skip to the next or a previous track, press the SKIP button.
< To stop Intro Check function, press the STOP button.
19