4-1-1] Wired Extension-Extension Settings-Clip Generate - Panasonic KX-TDA50 Programming Manual

2.10 [4] Extension
Default
Extension number of port 01 of the first extension card that is installed.
Value Range
Wired extension number
Maintenance Console Location
2.10.2 [4-1-1] Wired Extension—Extension Settings—CLIP Generate
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings
Feature Manual References
1.3.13 CLIP (Calling Line Identification Presentation)
Number to Generate
Specifies the number of locations to be programmed.
A CLIP number will only be assigned to connected wired extensions, even if the number entered here
is larger than the total number of wired extensions.
Default
24
Value Range
1–total number of connected wired extensions
Maintenance Console Location
2.10.2 [4-1-1] Wired Extension—Extension Settings—CLIP Generate
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings
Feature Manual References
1.3.13 CLIP (Calling Line Identification Presentation)
No. of Digits to Delete
Specifies the number of digits to be deleted from the start of an extension number when using it as
part of the CLIP number.
Default
0
Value Range
0–4
444 PC Programming Manual