Connect-Modem - Panasonic KX-TDA50 Programming Manual

Connection Settings for LAN (KX-TDA100/KX-TDA200/KX-TDA600 only)
Setting
IP Address
Port Number
2.3.4 Connect—Modem
Connects to the PBX in Interactive mode through the modem.
To access the PBX remotely using this feature, an RMT card must be installed and the Remote—
Analog Remote (Modem) Floating Extension Number assigned in 2.17.1 [11-1] Main.
This option allows direct entry of connection parameters, for cases where the PC is used to connect
to one or just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to
multiple PBXs and would prefer to choose from among pre-saved profiles instead, see 2.4.11 Tool—
Profile Setup for more details about creating profiles.
To connect to the PBX by Modem
1.
From the Connect menu, select Modem.
The Login window will be displayed.
2.
Select a connection option.
• Select the Use profile check box if you want to use a pre-saved profile.
a.
b.
• Confirm that the Modem radio button is selected if you want to enter parameters manually.
a.
b.
c.
3.
Click OK.
Connection Settings for Modem
Setting
Dial Number
Values
1.0.0.0–
223.255.255.255
10000–65535
Select the profile to use from the drop-down list.
The Setup button will become unavailable.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
Click Setup.
Modify the connection parameters as required. For more details, see the table below.
Click OK.
Values
1-9, 0, *, # and ","
[comma]
Explanation
Specify the IP address of the PBX on the LAN.
Enter the same IP address that was input in IP
Address of 2.7.27 [1-1] Slot—CTI-LINK Card
Property (KX-TDA100/KX-TDA200/KX-
TDA600 only).
Specify the port number used to access the
PBX via LAN. Enter the same port number that
was input in Maintenance Port Number of
2.7.27 [1-1] Slot—CTI-LINK Card Property
(KX-TDA100/KX-TDA200/KX-TDA600 only).
Description
Enter the telephone number to be dialed to
access the PBX.
PC Programming Manual
2.3 Connect
35