2-8-1] Ring Tone Patterns-Call From Co - Panasonic KX-TDA50 Programming Manual

Value Range
Block (blue), Non Block
Maintenance Console Location
2.8.13 [2-7-3] Class of Service—Internal Call Block
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—COS
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.10 [4-2-1] Portable Station—Extension Settings—Main—COS
2.11.1 [5-1] Doorphone—COS
Feature Manual References
1.9.14 Internal Call Block
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
Different ring tone patterns can be selected for incoming CO line calls depending on the trunk group
that the calls are received on. A maximum of 8 Ring Tone Pattern Tables can be programmed, and
any pattern table can be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming CO line calls.
Default
Single
Value Range
Single, Double, Triple
Maintenance Console Location
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
Programming Manual References
2.16.1 [10-1] CO Line Settings—Trunk Group Number
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.10 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.15.2 Ring Tone Pattern Selection
2.8 [2] System
PC Programming Manual 293