2.7 [1] Configuration
Value Range
-14–6 dB
Maintenance Console Location
2.7.22 [1-1] Slot—IP-Extension Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
NLP Setting
Selects whether the NLP (Non-Linear Processor) is used to control echo sound quality.
Default
Use Non-Linear Processor
Value Range
Use Non-Linear Processor, Use Fixed TX Gain
Maintenance Console Location
2.7.22 [1-1] Slot—IP-Extension Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
2.7.23 [1-1] Slot—IP-Extension Port (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Various settings can be programmed for each IP extension port.
To change the status of extension ports, click Command.
IP-PT Registration and De-registration
An IP-PT must be registered to the PBX by programming both the PBX and IP-PT before it can be
used. Programming instructions of the PBX are given below.
It is possible to de-register the IP-PT later.
Preparation
Follow the steps below to prepare before registering an IP-PT.
186
PC Programming Manual