QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.9.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
1.13.17 PRIVATE NETWORK FEATURES—QSIG
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.15 [1-1] Slot—PRI Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
Status Message
Specifies whether the Status Message is sent to the network.
Default
No Transmission
Value Range
No Transmission: Status Message is not sent.
When error detection (Mandatory): Send the Status Message when an error (Mandatory) is detected.
2.7 [1] Configuration
PC Programming Manual
137