Table of Contents
Advertisement
Troubleshooting
If you put the menu back to the settings at the time of purchase, the conditions may be
improved. Carry out the [RESET] in the setup menu. (P21)
Conditions
The camera will not turn
on.
The picture is not
displayed on the LCD
monitor.
The brightness of the
screen becomes dark or
bright for a moment.
The picture cannot be
recorded.
The screen is too bright
or dark.
Flash is not activated.
The flash is activated
2 times.
Unreadable language
was selected by mistake.
The subject is not
focused properly.
Others
Is the battery inserted correctly? Check the direction of the
battery.
Is the battery sufficiently charged?
Use a battery that has been sufficiently charged.
Are the power save mode (P20) or economy mode (P21)
activated? Press the shutter button halfway to disactive these
modes.
Is the battery charge insufficient to operate the camera? Use
a battery that has been sufficiently charged.
Is the built-in flash charging? While the flash is being
charged in economy mode, the LCD monitor is off.
This phenomenon appears when pressing the shutter button
halfway to set the aperture value and does not affect the
recorded pictures.
Is the card inserted?
Is the mode dial correctly set?
Is there any memory capacity left on the card?
Before recording, delete some pictures.
Adjust the brightness of the screen. (P20)
Is the Power LCD function activated? (P24)
Is the flash mode set to Forced OFF? Change the flash
mode. (P36)
The flash is not activated when [SCENERY],
[NIGHT SCENERY], or [FIREWORKS] in scene mode is
selected.
The first flash is activated for red-eye prevention on the
subject (red-eye phenomenon). 1 second after, the flash is
activated again for recording.
Select [
] icon on the [SETUP] menu to set the desired
language.
The focus range varies depending on the recording mode.
Rotate the mode dial to set to the proper mode for the
distance to the subject.
Is the subject out of the focus range? (P29)
When you cannot focus on the subject even if you tried many
times, turn the camera off once and turn it on again.
Causes/Remedies
97
Advertisement
Table of Contents
