Panasonic DMC-FX2GN Operating Instructions Manual page 20

You can control the following items on [SETUP] Menu.
Menu
MONITOR
AUTO REVIEW
POWER SAVE
20
Preparation
Adjust the brightness of the LCD monitor in 7 steps.
[OFF]: The recorded picture does not automatically appear.
[1SEC.]: The recorded picture automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture automatically appears on the
screen for about 1 second. Then it is enlarged 4 times
and appears for about 1 second. This mode is useful
for confirming focus. Pictures in burst mode, auto
bracket, pictures with audio (DMC-FX7 only) are not
enlarged even if [ZOOM] is selected.
• In motion image mode [
activated.
• When pictures are recorded in burst mode or auto bracket, the
time for the auto review function is fixed to 1 second regardless
of the setting on the [SETUP] menu. (The picture is not
enlarged.)
• When using pictures with audio, the auto review function works
while recording the audio or the data into the card regardless of
the setting on the auto review function. (The picture is not
enlarged.) (DMC-FX7 only)
The battery life is saved by turning the camera off automatically
while the camera is not used.
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
The camera is automatically turned off if it has not been
used for a predetermined amount of time.
(Press the shutter button or turn the camera off and on to
switch the camera on.)
• When connecting to a PC or a printer/recording motion images/
playing back motion images/during Slide Show, the power save
mode is not activated.
• In the economy mode, the power save is set to [2MIN.].
Functions
], auto review function is not