Table of Contents
Advertisement
Taking Pictures using the Built-in Flash
When you set the flash, you can take
pictures using the built-in flash according to
the recording condition.
Photo flash 1
Do not cover it with your finger or any other
items.
∫ Switching to the appropriate flash
setting
Set the flash setting of the built-in flash
according to the scene to be recorded.
For the selectable flash settings, refer to
"Available flash settings by recording
mode" on P37.
36
Recording pictures (basic)
: AUTO
The flash is automatically activated
according to the recording condition.
: AUTO/Red-eye reduction
The flash is automatically activated
according to the recording condition.
It reduces the red-eye phenomenon
(eyes of the subject appear red in photo
flash) by triggering the flash at 1 second
before actually recording the picture.
• Use this when you take pictures of
people in low lighting conditions.
: Forced ON
The flash is activated every time
regardless of the recording condition.
• Use this when your subject is
back-lit or under fluorescent light.
: Forced ON/Red-eye reduction
• In [PARTY] in scene mode (P51) or
when you compensate the backlight in
simple mode [
to Forced ON/Red-eye reduction.
: Slow sync./Red-eye reduction
When you take a picture with a dark
background landscape, this feature
makes the shutter speed slow when the
flash is activated, so that the dark
background landscape will become
bright. Simultaneously it reduces the
red-eye phenomenon.
• Use this when taking pictures of
people in front of a dark background.
: Forced OFF
The flash is not activated in any
recording condition.
• Use this when taking pictures in
places where the use of the flash is
not permitted.
], the flash mode is set
Advertisement
Table of Contents
